CASSEM material database

If you have any suggestions for new smart materials, feed back on the Material database itself, please contact us at info@cassem.lu. Please note that this database has just been launched and as such you may encounter some minor faults or bugs. At this moment we are working very hard to fine-tune the database and we apologize for any inconvenience you may expericence during this time.

Polyethylene (PE) by Salim Belouettar — last modified 2006-10-19 14:17

Polyethylene (PE) is a thermoplastic material produced from the polymerization of ... PE materials are generally resistant to most ordinary chemicals

PE-HWV by Salim Belouettar — last modified 2006-10-19 14:57

 

PE-LMD by Salim Belouettar — last modified 2006-10-19 15:06

 

PA 6.6 by Salim Belouettar — last modified 2006-10-19 15:18

 

PVC-CAW-B1 by Salim Belouettar — last modified 2006-10-19 17:23

 

PP-H by Salim Belouettar — last modified 2006-10-19 17:33

 

PS by Salim Belouettar — last modified 2006-10-19 17:46

 

Foam Material KS2 by Salim Belouettar — last modified 2006-10-19 17:55

A foam named KS2 was investigated with regard to its mechanical properties. Besides the behaviour with uni-axial pressure also the viscoelastic material behaviour was investigated in detail. The work as carried out can be sub-divided into the following steps: Test with specimens Identification of the material parameters Simulation of the tests done

Silicone Rubber ELASTOSIL RT 607 by Salim Belouettar — last modified 2006-10-20 08:48

 

Piezoelectric tested materials by Salim Belouettar — last modified 2006-10-20 08:49

Both types of application are pursued in CASSEM. Two different forms of piezo-ceramics are investigated: HP PFC-sensors/actuators of Messrs. Neue Materialien Würzburg (NMW), whom WBI are closely co-operating with, and PZT-plates of Messrs. PI Ceramics that are designed for the d15-effect which is investigated in CASSEM

composite Materials by Salim Belouettar — last modified 2006-10-20 09:39

For those materials the following test specimens are available within the consortium: carbon-fibre reinforced plastic laminate (CFRP-laminate), aluminium beams with PZT-plates, glass-fibre reinforced plastic (GFRP)-beams with PFC, CFRP-beams with PFC

Literature by Salim Belouettar — last modified 2006-10-20 10:10